Berrcom Pulse Oximeter Blood Oxygen Saturation Monitor for Children and Adults

The Berrcom Pulse Oximeter offers outstanding performance, accurate and reliable measurements, and easy operation.

✅ Outstanding Performance: The Berrcom oximeter utilizes photoelectric detection principles to accurately capture blood oxygen signals, resulting in +/- 2% measurement accuracy. If the measured blood oxygen saturation falls below 94% or the pulse rate exceeds 130bpm or falls below 50bpm, the device provides an audible alarm and flashing measured value display to ensure timely attention to the measurement outcome.

✅ Accurate and Reliable: The oxygen blood monitor employs advanced algorithms and a sophisticated chip, delivering precise SpO2 (oxygen saturation level) and pulse readings in just 8 seconds. The results are displayed on a large LED display, providing you with convenient monitoring. Silicone shading design prevents external light and shadows from affecting measurements.

✅ Easy Operation: The finger clip pulse oximeter features one-button measurement, and the measurement results are displayed on a large digital LED screen that can be viewed from both directions. You can change the display orientation with each press of the oximeter button. It automatically powers off after 30 seconds of removing your finger to save energy.

✅ Warm Tips: When the oxygen level monitor does not respond after inserting the battery, please pay attention to check: 1. Before using, pay attention to the positive and negative direction of the battery. 2. Make sure there is a red light inside before putting your finger to measure. Please exercise caution when reading the results displayed on the screen to ensure that you distinguish between the oxygen saturation (SpO2) and pulse readings accurately and avoid any misinterpretation.

✅ Wide Audience: The pulse oximeter is designed to be portable and can be taken anywhere. Includes 2 x AAA Batteries, 1 x lanyard, 1 x user manual. It can be widely used in children, adults, seniors, pregnant women or anyone interested. For sports enthusiasts like mountain climbers, skiers, bikers, and anyone needing to monitor their SpO2 and pulse rate.

The normal measurement value of SpO2 is usually within the range of 95%-98%, and the pulse rate should be between 60bpm-100bpm. However, in some cases, this standard may not be applicable. If the device cannot be turned on and used normally, it could be due to depleted or almost depleted battery, incorrect battery installation, or equipment issues. If the display screen suddenly shuts down, it could be because the product is not operated within 15 seconds, or the battery is almost depleted.

Measured values cannot be displayed normally or are unstable due to incorrect finger position, low finger temperature, environmental factors, body movement during measurement, or measuring too soon after exercise. To avoid measurement failure, ensure the fingertip blocks the red sensor light, keep the finger warm, measure in an environment without strong light, keep your body still, and wait for 10-15 minutes after exercise.

product information: